top of page

Fitting Your Magman® Product

Fitting Your Magflap MK3

1. Ensure the door surface is clean and align the Magflap to the door 


2. Use a bradawl to mark each screw hole
 

3. Fit the first central screw. 


4. Ensure the Magflap is Level 


5. Fit all remaining screws.

Require some assistance?

​

Get in touch to check if any of our products will fit your door and we'll come back to you with a personal response within 24 hours!

Thanks for submitting!

Diagrams

Vertical MK2 Diagrams.png
Horizontal MK3 & MK2 Measurements.png
Vertical MK3 images.png

UPVC FITTING INSTRUCTIONS: 

 

The Magflap can be fitted to UPVC doors (internally fitted only).

​

If your front flap is connected to the rear flap by connecting bolts going through the the door, it can be fitted by holding the front flap in place and fitting a flat washer to the bolt and a nut on the other side which then holds the front flap in place. Then, simply attach the Magflap Internally. 

120a Create Studios

Hartopp Road

​

LE21WF

Leicestershire, England

As seen in (2).png

Magflap by Magman®

bottom of page